Rosholt Roofing Services
Our service list isn't complicated: we fix roofs, replace roofs, and install new ones. We also handle gutters, metal systems, and flat roofing for commercial buildings across Rosholt.
Roof Replacement
After tear-off, we always check decking and replace what's needed. Soft spots mean moisture intrusion. The old roof was leaking longer than you realized. We use 7/16" or 15/32" CDX plywood depending on rafter spacing. New decking costs $75-$120 per sheet installed. We only replace what's actually damaged.
Get a Free Quote →
Roof Repair
Improper step flashing is the leading cause of roof leaks at wall-to-roof transitions. Step flashing needs to be woven between shingle courses with each piece extending 4" above the shingle exposure. We see Rosholt homes where the last roofer used continuous L-flashing or just caulked the gap. That always fails. We tear it out and install proper step flashing with a kick-out diverter at the bottom per IRC R905.2.8.3.
Get a Free Quote →
Storm Damage Repair
Wind damage and hail damage look different and require different documentation. Our HAAG-trained inspectors know what adjusters look for: granule displacement patterns, fractures in the shingle mat, seal failures, cracked ridge caps. Proper documentation is why our claims get approved.
Get a Free Quote →
New Roof Installation
New construction underlayment per IRC R905 and ASTM D226 (felt) or ASTM D6757 (synthetic). Ice barrier per ASTM D1970 required at eaves in climate zones with average January temperature below 25°F. We install ice and water shield regardless. It's cheap insurance against ice dams and wind-driven rain. Drip edge per IRC R905.2.8.5 on eave and rake edges. Proper starter strip with factory sealant for wind resistance from day one.
Get a Free Quote →
Metal Roofing
We install 24-gauge and 26-gauge steel standing seam panels in Galvalume and pre-painted finishes. Concealed fastener clips allow the panels to expand and contract with temperature changes without stress on the fasteners. That's why standing seam doesn't leak. The clips float.
Get a Free Quote →
Shingle Roofing
The difference between a cheap shingle roof and a quality one comes down to the system underneath. Shingles are only the outer layer. Ice and water shield in the valleys, synthetic underlayment across the deck, proper starter strip with factory adhesive, correct nailing pattern. That's what makes a shingle roof last in South Dakota's weather.
Get a Free Quote →
Flat Roofing
Flat roofs don't actually drain themselves. That's the challenge. Water ponds, UV breaks down the membrane, and eventually it leaks. We install and repair TPO, PVC, EPDM, modified bitumen, and built-up roofing systems designed for zero-slope conditions in Rosholt.
Get a Free Quote →
Commercial Roofing
TPO is our most-installed commercial membrane in Rosholt. 60-mil thickness, hot-air welded seams, mechanically attached or fully adhered over polyiso insulation. The weld is stronger than the membrane. 15-20 year manufacturer warranties depending on system build-up.
Get a Free Quote →
Gutter Installation
Gutter replacement in Rosholt costs $8-$15 per linear foot installed. That includes hangers, end caps, outlet drops, miters, and at least two downspout runs. Copper is $25-$40 per foot. We give exact pricing in the estimate. No ranges.
Get a Free Quote →
Roof Inspection
Commercial and flat roof inspections include infrared moisture scanning with Flir E8 thermal cameras. Trapped moisture in the insulation layer shows as temperature differentials on the thermal image. No need to cut core samples everywhere. We identify wet zones, then core sample the suspect areas to confirm. This approach gives you a precise repair scope at a fraction of the cost of exploratory tear-offs.
Get a Free Quote →
Emergency Roof Repair
After we secure the tarp and stop the leak, we photograph and document everything while the damage is fresh. This documentation is critical for insurance claims. Adjusters want to see the damage before any repairs are made.
Get a Free Quote →
Skylight Installation
Skylight replacement on existing curbs: VELUX FCM curb-mount units install directly on the existing curb frame. No structural modification, no interior disruption. The FCM sits on the curb with a built-in sill pan and integrates with a new QCM flashing kit. Low-E4 laminated glass with argon fill provides R-value improvements over older skylights. Solar-powered blinds and venting available on VSS models. The 10-year No Leak Installation Warranty requires VELUX-certified installation with the complete flashing system. We're certified in Rosholt.
Get a Free Quote →